Photocell and Mechanical Timer for Low Voltage Transformer
Mechanical Plug-In Timer
Easy Set Up Operation
Turns lamp on/off at desired times daily
Easy to install - Easy to use , 3 Pin Male Connector
Activates landscape lighting system at sunset and disables at sunrise
Have a question? We are here to help.
Check out the most common questions our customers asked.Still have questions? Contact our customer support.
What is the beam angle?
The beam angle is determined by the bulb used in this fixture.Our own light source is 45 degrees.
What are the lumes on the light bulb provided ?
The light bulb we provide for this fixture is 360 lumen and 2700K.
What do I use to mount to a tree for downlighting purposes? The mounting for the lights in the box only supports uplighting
You can buy a ring surface wall mount separately for it, so you can Install this lights on tree or wall for downlighting.
What is difference between 101B/102B/103B fixtures?
They vary in appearance and size.
how does the light connect to the leed wire?
Our light fixture with 6 foot wire and 2 connectors, you can strip part of the leed wire insulation and connect the wires from the light fixture to the leed wire.
Is the transformer required for this spotlight?
Yes, our landscape spotlights work with 12V AC/DC low voltage, it requires a transformer to reduce the voltage from 110V to 12V.
Can an MR-11 bulb be used in this fixture?
Yes, MR11 bulb can be used in 101B/102B/103B fixtrue.
I am replacing broken lamp that is on a volt landscape lighting16 volt transformer. is this compatible?
Multi-tap transformers provide taps from 12 to 22 volt. The higher voltage taps are for long runs of cable because voltage decreases over long distances. This light should work on a 16v tap, however, if the higher voltage is sustained over the entire line it may effect the life of the bulb.
Do these come in white?
the light fixtures are bronze and the skate for these are black, don't have white light fixtures, thank you.
Can this work with rgb-w multiple color mr16 bulbs?
Yes it works well with any type of MR16 bulbs as long as it's the standard size MR16
Where can I order the ring surface Mounting brackets ?
you can search keyword "brass ring mounting plate" at amazon, will find the ring surface mounting brackets from other sellers, thank you.
Mi have mr16 bulbs that uses 60 degree beam. Will bulb turn this light more like a floodlight rather than a spotlight?
60 degree beam mr16 bulb use in this fixture also project a spotlight, thank you.
Any question?
You can contact us through our contact page! We will be happy to assist you.
This product has no reviews yet.
Let customers speak for us
I like these a lot. You need to mount them against a fence or wall to get the full lighting effect, a splash downwards. I like these. They are made extremely well and should last many years.
Easy to set up and square properly. Only one small 1/4 hole required for the cord and its covered by the light fixture. You do need to do a little extra work compared to store bought landscape lights tho in that you have to use wire nuts and spice into your source wire, but its still easy. Im going to get at least 2 more sets when I redo the fence on the other side of my house.
Sturdy housing & good light
They are well made, durable, and look great. The light is a soft, warm color that gives a great ambiance. We liked them so much, we ordered another pack for our side porch.
Great heavy duty solid brass fixture! Easy to adjust the direction of the light so its perfect for any pond or fountain.
I installed these on a wall along a path. They work great and are a good value.
You can feel the quality by holding it.
Not only do they give off a beautiful ambience light but they actually are bright enough to make our pathway and deck stairs safer. Not too bright and not too dim.brightness is perfect! We bought extra lights to have installed on the other side of the deck so we could see the pathway that goes around the deck. Very happy with this purchase. Solar just doesnt have the same effect as these.
This underwater light is well built, I can tell. it's durable and gives off the right amount of light.
An excellent addition to my pond! The sturdy brass craftsmanship is built to endure, and the warm glow of the light lends a charming ambiance. Installation was straightforward, thanks to the adjustable bracket and ample lead wire. Highly recommendedtruly a fine purchase!"
These are hefty, well made brass deck light fixtures for low voltage landscape applications. The metal is die cast and smooth. Mine had no rough edges or defects in the finish. They are easy to mount and come with waterproof wire nuts to hook up to your existing landscape lighting system. Keep in mind these do NOT come with bulbs. You will need to purchase a 12v-24v G4 bulb to use with them. This allows you to pick the color temperature that best matches your existing lighting plus makes it easy to change if the bulb ever goes out. A well done fixture and I definitely recommend it.
Love it. Sits in my pond without moving and provides a nice white light. A bit expensive but worth the money.
I use this for a spot light on my small fish pond water falls. Looks very nice.
Love these outdoor lights. Very happy with them.
Love these outdoor lights. Very happy with them.
News
Should Your Landscape Lighting Stay On All Night?
A well-designed landscape lighting system enhances safety, highlights architectural features, and extends outdoor living hours. However, keeping lights on continuously wastes energy, increases ...
Is Your Transformer Installed Correctly?
A Guide to Safe and Efficient Low-Voltage Lighting Systems Proper installation and use of transformers are critical to the safety, efficiency, and longevity of outdoor lighting systems. This gu...
Creating a Luxurious Garden with Premium Brass Outdoor Lighting
Transform your backyard into a luxurious retreat with premium brass outdoor lighting. Learn expert tips for creating stunning garden spaces that shine day and night.