Low Voltage Landscape Lighting | Submersible Waterfall Pool Fountain Light | Brass Underwater Lights COU1201B

Sale price$63.99 USD Regular price$69.99 USD
Save $6.00

👉Subscribe to get $10 off on your first order!

  • High-salt, moisture, and UV resist, uniform, and long-lasting finish fixture, the fine workmanship makes it tougher, harder, and aesthetically pleasing.
  • With 25-foot 16 AWG lead wire, suitable for a variety of installation requirements.
  • With Vertical 180 degree, can adjust the angle of the lighting easily.
  • Uses halogen lamps up to 50w or rated LED MR16, it emits a soft and warm 2700K light, providing a comfortable experience.

Color: Bronze
Bulb: With Bulb
Pack: 1-pack
Sale price$63.99 USD Regular price$69.99 USD

Die-cast Brass 12V Low Voltage Outdoor Underwater Light

COLOER solid die-cast brass underwater light IP65 waterproof and corrosion resistant, easy to install very durable. Adjustable shade moves up and down to modify the spread of light.

Unique Design: This beautifully crafted waterproof underwater light is constructed from die-cast brass. It does not leak, rust, or corrode. With a rating of IP68 waterproof, this fixture is fully submersible and can be placed fairly deep in your pond floor. The bronze finish allows it to maintain its original appearance even after being underwater for a prolonged period of time.

Energy Efficiency: The heavy-duty patio pond underwater LED lights are energy efficient, with 5W, 2700K, 45 degree LED MR16 bulbs that will help you save up to 80% in electricity costs. They are suitable for an average of 50,000 hours to avoid the trouble of frequently replacing the bulb. Experience true color rendition with our 85+ CRI landscape lights.Please note that this LED pond light must be powered by a 12-24V low-voltage transformer (not included).

Easy to Istall: The robust base provides a secure mount with no hardware required and the adjustable bracket allows you to direct the light at different angles. When mounted externally, they can be fitted by screwing into the bracket or placed on stakes and positioned in the ground. The light comes with a pre-stripped 25 foot premium lead wire, which allows for an easy connection to an existing landscape system.

Versatile Use: It can be mounted both underwater or outside water as a spotlight. Due to their stronger output, these lights would be a great choice to illuminate larger ponds or larger features. Our waterproof, heavy-duty patio pond underwater LED lights are 100% waterproof and work for pool waterfalls, outdoor ponds, fountains, streams, water statues, and pond rocks.

Lifetime Warranty: Constructed using state-of-the-art components, COLOER landscape lights are built to the highest standards of construction and performance. We offer a lifetime warranty on the brass light fixture and a 5 year warranty for the LED bulb based 50,000-hour lifespan. We firmly stand behind our product with our top-rated customer service. Please don't hesitate to contact us if you have any issues.

Submersible Waterfall Pool Fountain Light

Heavy-duty Brass Fixture
300" 16AWG Lead Wire
MR16 Bulb 5W 2700K
IP68 Waterproof

What included in the box

  • Main Fixture
  • LED MR16 Bulb
  • Wire Connectors
  • User Manual

How long can I receive it

  • We have CA/FL two warehouses for service
  • We will arrange delivery nearby
  • You will receive the goods in 3-5 work days
  • Remote areas may take a little longer

How long is the warranty

  • Brass Fixture: Lifetime
  • Aluminum Fixture: 5 Years
  • LED Bulbs: 5 Years
  • Transformers: Lifetime

12V LOW VOLTAGE

DIE-CAST BRASS

Solid die-cast brass Underwater Light IP65 waterproof and corrosion resistant, easy to install very durable. Adjustable shade moves up and down to modify spread of light. Ceramic white paint under shade for maximum photometrics. This compact cast brass fixture is ideal for soft illumination of small to medium objects and landscape features. Compatible with MR16 LED or halogen bi-pin bulbs up to 20W (not included).

Uniform Finish

Die-cast brass underwater light with 6-foot 18 AWG lead wire.

Silicone Sealing Ring

With High Waterproof Performance.

Adjustable

Vertical 180 degree, you can adjust the height of the light by yourself.

MR16 Bulb Socket

The light source can use MR16 or halogen bi-pin bulbs up to 20W (Optional)

01

How to Choose Transformer

To determine the size of transformer needed for a low voltage lighting system, add up the wattage of all fixtures in the system and add 10% for lowvoltage cable and fixtures connections.

If the total load of fixtures is too great, either divide the total load between 2 transformers or use a more powerful transformer.
Select a transformer with 20% higher capacity than total wattage of all fixtures in the system, that allow you to add more fixtures later.

TRANSFORMER SIZING
SIZE OF TRANSFORMER=TOTAL WATTAGES OF FIXTURES X 1.1

Select a transformer that matches as close as possible to calculation shown above.

Example:you have 12 fixtures, each 5 watt. You need a 75 watt transformer (12x5=60 plus 10%= 66)

NOTE: Low voltage lighting systems require the use of a transformer to reduce the standard 120 volt power from ordinary household electricity to 12, 13, 14, and 15volt needed to power low voltage fixtures.
The total wattage of all fixtures connected to one transformer must not exceed the wattage capacity of the transformer.

02

How to Install

Step 1: Make sure that the power is turned OFF before installing or servicing this fixture.

Step 2: Remove the shroud of the fixture and insert MR16 lamp into the lamp socket.

Step 3: Screw the fixture onto the stake. Lay out fixtures at desired locations. Any combination of lights is acceptable as long as the total wattage does not exceed 85% percent of the power supply transformer.

Step 4: Remove the sleeves from the pre-stripped lead wire. Use the wire connectors to connect lead wire to the main power supply cord.

01

How to Choose Transformer

To determine the size of transformer needed for a low voltage lighting system, add up the wattage of all fixtures in the system and add 10% for lowvoltage cable and fixtures connections.

If the total load of fixtures is too great, either divide the total load between 2 transformers or use a more powerful transformer.
Select a transformer with 20% higher capacity than total wattage of all fixtures in the system, that allow you to add more fixtures later.

TRANSFORMER SIZING
SIZE OF TRANSFORMER=TOTAL WATTAGES OF FIXTURES X 1.1

Select a transformer that matches as close as possible to calculation shown above.

Example:you have 12 fixtures, each 5 watt. You need a 75 watt transformer (12x5=60 plus 10%= 66)

NOTE: Low voltage lighting systems require the use of a transformer to reduce the standard 120 volt power from ordinary household electricity to 12, 13, 14, and 15volt needed to power low voltage fixtures.
The total wattage of all fixtures connected to one transformer must not exceed the wattage capacity of the transformer.

02

How to Install

Step 1: Make sure that the power is turned OFF before installing or servicing this fixture.

Step 2: Remove the shroud of the fixture and insert MR16 lamp into the lamp socket.

Step 3: Screw the fixture onto the stake. Lay out fixtures at desired locations. Any combination of lights is acceptable as long as the total wattage does not exceed 85% percent of the power supply transformer.

Step 4: Remove the sleeves from the pre-stripped lead wire. Use the wire connectors to connect lead wire to the main power supply cord.

COLOER Die-cast Brass 12V Low Voltage Outdoor Underwater Light

COLOER solid die-cast brass underwater light IP65 waterproof and corrosion resistant, easy to install very durable. Adjustable shade moves up and down to modify spread of light.

Customer Reviews

Based on 10 reviews
100%
(10)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
m
marbelys
High quality product

As an electrician, I was thoroughly pleased with the underwater light. The quality is exceptional, and the lights seamlessly integrate with their surroundings. Their well-distributed light output ensures a smooth illumination across the entire area, resulting in satisfied customers.

m
matt
Really Superior Quality

These underwater lights truly exceed expectations in terms of quality. I have absolutely no complaints about them. They shine brilliantly, possess a substantial weight, and exhibit remarkable durability compared to other lights I've owned in the past. I wouldn't hesitate to purchase them again, and it's highly probable that I will, especially for illuminating the pool area in the front yard. In fact, I've already utilized these lights to beautifully highlight both my pool in the backyard and the surrounding side yard.

S
Speedy R
Good lighting!

I was very happy with the size, quality and light output of these lights. For sure they are much better quality compared to some I have seen and put out a good amount of light for my pool.

B
Billade
It is heavy, stays in place and is waterproof

I absolutely adore this light! I installed it at the 7ft deep end of my rec pond, and it works like a charm. The illumination it provides is just perfect.

R
RickB
Well built light

This light is very heavy duty with a nice finish and good gaskets. It is actually made for ponds and for underwater use, but I used it to light up my flag, so I just set it below the flag and pointed it up. Worked great! It does not come with a bulb so you have to purchase an MR16 bulb. It has a pretty long wire lead that I connected to my existing landscape lighting wires and transformers. Works and looks great!

Still have questions? 

COLOER is a manufacturer-direct company based in the United States, dedicated to offering high-quality, affordable products. With a foundation of 10 years of industry experience, we are committed to providing top-notch service through direct sales.

We guarantee local shipment for all products, with delivery as fast as 2 working days after ordering. Therefore, by choosing COLOER, you can expect competitive pricing, quality assurance, efficient delivery, and attentive after-sales service.

For bulk orders or any other product inquiries, please feel free to contact us via phone or email. We are wholeheartedly committed to providing you with consultation and support.

Call: 626-699-4666
Email: customerservice@coloer.com
Business Hours: Monday to Friday 9:00 AM – 5:00 PM CST